When you are vaping, it may give a "ohms too low" or "ohms too high" warning?
There are two reasons:
(1) Normal circumstance:
- The coil resistance is less than 0.1 ohm or more than 3.0 ohm.
(2) Abnormal circumstance: If the warning still pops out while coil resistance is reasonable, it may be caused by the following reasons:
- Resistance detection component is broken, can't read it correctly.
- The components of the product are short-circuited.
Screws are not tight down. When meeting these problems, you could try the following methods to recover:
- Please take off the tank and click the fire button, and then place that tank back on, click "n" when it asks "is it a new coil".
- Please make sure screws are tight on the tank if you use the RBA coil on your mod.
- Please try with other tanks or coils on your mod, and try the same tank on the other mods to check whether they work fine.
