Joyetech Evic Primo 2.0 with Unimax 2 Atomizer

Joyetech Evic Primo 2.0 with Unimax 2 Atomizer

• Brand: Joyetech
  
• Unit: set
• Net Weight: 450(g)

Combined shipping cost will be calculated automatically by the system after you choose shipping destination in the checkout step. Register and sign in your account to get bulk discounts! 

Product Introduction  

Powered by dual replaceable 18650 batteries, the eVic Primo 2.0 provides durability and reliability with a 228W maximum output. Featuring the new equalizing charge system, it supports 2.0A quick charge capability. The UNIMAX 2 atomizer adopts the exclusive TFTA-Tank system where airflow control and e-liquid filling can be easily achieved by rotating or removing the top cap. The eVic Primo 2.0 also comes with upgradeable firmware, as well as multiple fashionable features including the real-time clock, custom logo and preheat. With the help of the RC (reverse charging) adapter, you can even use it as a power bank to charge your electronic products. 

Parameter  

Size: 53.0mm*26.0mm*132.5mm
Colors: silver, black/silver, black/red, black/grey, bronze
Battery weight: 156.0g (no cell)
Output mode: VW/VT (Ni, Ti, SS316)/TCR/Smart/RTC/USB Charge mode
Features: quick charge/reverse charge/preheat/custom logo/real-time clock
Output range: 1-228W
E-liquid capacity: 5ml
Resistance range: 0.05-1.5ohm under VT/TCR mode
0.1-3.5ohm under VW mode
Applicable heads: BFL/BFXL coil heads
BF series heads (exclusive BF RBA/LVC/QCS) with BF adapter
Temperature control: 100-315°C/ 200-600°F
Battery using: dual married high-rate 18650 cells  (continues discharge current 25A)
Max charging current: 2.0A
Max output current: 50A
Output voltage range: 0.5-9V

Joyetech Evic Primo 2.0 with Unimax 2 Atomizer comes with   

1pc  eVic Primo 2.0 (no cell)
1pc UNIMAX 2 atomizer
2pcs BFL-1 (0.25ohm) head
1pc Spare glass tube
1pc QC USB Cable
2pcs Manual
1pc Warranty Card
2pcs Warning Card
 Spare parts

 Features 

1. 228W with 50A maximum output current

The eVic Primo 2.0 is powered by dual 18650 high-rate batteries where max output can be reached to 228W. It offers more possibilities when using various coils with its 50A maximum output current.

2. Applicable for various tanks

The exquisite spring loaded 510 connector of the eVic Primo 2.0 is applicable for tanks with 510 length ranged at 4.0mm to 5.5mm. Tanks are also free to go up to 25mm diameter as you prefer.

3. Exclusive TFTA-Tank structure for easy operation

The Joyetech exclusive TFTA (top-filing and top-airflow) technology was perfectly applied into the UNIMAX 2 atomizer. Simply rotate the top cap to the left or right to adjust the airflow inlet. Unscrew the top cap and inject the e-liquid into the side holes from the top.

4. Flavor and cloud chasing

BFL-1 Kth 0.25ohm DL. head (40-80W)

The BFL-1 (0.25ohm) head, using Kanthal coil, is the perfect combination for cloud chasing and pure flavor. It can be used under power mode with wattage setting at 40W to 80W.

5. Equalizing charge system

Equalizing charge technology was applied in order to bring all cells to an equal state of charge.

6. Power bank for reverse charge

The eVic Primo 2.0 can be served as a power bank to charge other e-cigarettes or electronic devices. Install the new reverse charging adapter (sell separately) on the 510 connector.

7. Onboard reverse polarity protection

The onboard reverse polarity protection protects the device from damage in the event of reverse battery installation.

8. Dual circuit protection

eVic Primo 2.0 applies two sets of battery protection circuit system, realizing overall battery protection of over-charging, over-current and over-discharging, which makes it more safe and reliable.

9. Large airflow and pure flavor

The UNIMAX 2 atomizer along with the newly constructed BFL coil head can ensure a large airflow inlet, producing a total pure flavor ever.

10. Detachable Structure, easy to clean

The UNIMAX 2 atomizer can be totally detached thus to wash or replace easily.

11. Upgradeable firmware

eVic Primo 2.0 comes with the upgradeable firmware.
Having the latest Version 4.05, real-time clock, preheat, custom logo, and reverse charging are all available.

12. Atomizer head replacement

Unscrew the upper component, you'll find the atomizer head attached on the vent pipe. Remove the coil head to replace or clean. 
(NOTE: Please do not wash the atomizer head with water. Simply scrub it with cotton or clean dry cloth.)

Package

Simple paper box. Customary Packing from the factory, the packing is subject to change without notice.