Rincoe Jellybox Nano Pod Kit is one of the Jellybox family. It is one of the few devices out there that can handle direct lung and mouth-to-lung vaping, which makes it stand out from other devices whose manufacturers purport them to do the same. It also has other advantages that make it worth considering over other pod mods. So what are the advantages of Jellybox Nano? Let’s find out on this review.
Rincoe Jellybox Nano Review
Jellybox Nano continues the transparent design style of the Jellybox line. It is a pod mod made for beginners and traveling vapers. It is extremely compact, only sized 54 x 19 x 68.2mm. Its small size makes it very portable, as it can fit in pockets and purses without taking up much space. Also, it is effortless to operate, as there are no power modes to worry about or infinite button combinations to remember.
Powered by a built-in 1000mAh battery, it has an output range of 10-30W and can support you throughout the day. In addition, it features the 3 LED lights so that the user can keep track of the vape’s status and shines through into the full device lighting it up!
What's more, there is an airflow adjustment switch on the side so you can customize the incoming air for your preference.
Safety Features
- * 8-Second Auto Cut Off Protection
- * Overheating Protection
- * Low Voltage Protection
- * Charging Protection
- * Short-Circuit Protection
- * Over Charging Protection
Jellybox Family
Want to clarify the similarities and differences between the Jellybox series products more clearly? Let’s see below.
Internal Build Quality and Design
The vape is very well put together, and the pod holds securely to the mod. As for the design, some users may find the see-through plastic a bit odd, but it gives the vape a bit of a retro look.
One area of criticism is that while the pod mod is small and portable, it is not very ergonomic. It would have been nice if the corners had been more rounded.
Battery
Battery performance is not bad, but it could be better. The pod mod can run for a day with the 1.0-ohm coil in the pod, but only half that with the 0.5-ohm coil, give or take an hour or two. It might have been better had they put a slightly larger battery in there.
Indicator Lights
Battery life is shown by an LED light beneath the firing button. The colors are:
- Green: 100 to 60 percent
- Blue: 60 to 30 percent
- Red: 30 to 0 percent
Also, there are four LED lights at the bottom that are there for no reason but to be decorative. These lights are excessively bright, but they can be turned off.
Jellybox Nano Cartridge
The pod holds 2.8 ml of liquid, and it is clear plastic so that the user can easily check the liquid level without having to hold the pod mod up to the light. It has a very comfortable duck-billed mouthpiece that accommodates mouth-to-lung and restricted lung vaping. Beneath the mouthpiece, there is a switch that controls the airflow. It moves back and forth, allowing the user to make the appropriate adjustments.
The pod is refilled from the side, which is something a few vapers may not like. However, judging from the placement of the mouthpiece, there was nowhere else to put the refilling port. Everyone should count their blessings that the designers did not put it at the bottom!
Jellybox Nano Coils
The starter kit comes with 0.5 and 1.0-ohm mesh coils. The lower resistance coil is for restricted lung vaping, and the higher resistance coil is for mouth-to-lung vaping. These coils do an excellent job generating high amounts of flavor, especially the MTL coil. Not only is the flavor perfect on MTL, but the airflow and temperature are just right.
Vapor Production
The restricted lung coil is flavorful, but not as much as the MTL coil. However, its advantage is that it produces a satisfying amount of vapor, and the airflow is silky and smooth.
Compatible Juices
The RDL coil requires freebase nicotine with 80/20 or 70/30 liquids, while the MTL coils require 50/50 salt nicotine liquids. The nicotine-free liquids with high vegetable glycerin content will produce larger clouds, and the 50/50 variants have better flavor on low wattages.
How Long Do the Coils Last?
These coils can last up to two weeks if they are used with proper liquids and are adequately primed. Use the coils with the liquids specified above and prime them as will be shown below. If users do these things, they should get plenty of vaping time from their coils.
How to Use Rincoe Jellybox Nano Pod Mod
No user should have any trouble figuring out how to use this pod mod starter kit. Follow these steps to get started:
- A. Prime the Coils: Choose the preferred coil and place several drops inside. Afterward, place the coil in the pod and fill the pod to capacity. Wait five to ten minutes for the coil to absorb the liquid.
- B. Changing the Coils: Change the coils by pushing or pulling them into or out of the recess in the pod’s bottom.
- C. Charging: Plug the USB-C cable into the charging port to charge the vape as needed.
- D. Refilling: Remove the pod and lift the silicone tab on the side. Use a syringe or juice bottle to top off the pod.
Use the button combinations below to operate the pod mod.
Button Combinations
Click the firing button five times to turn the pod mod on/off
Click the firing button three times to turn the bottom LED lights on/off
Rincoe Jellybox Nano vs. Smok Acro 25W
Smok Acro’s advantage is that it has a more ergonomic design than the Jellybox Nano, having a rounded body that fits more comfortably in hands and pockets.
While it vapes great, it comes with two of the same 0.8-ohm pods with integrated coils. Two pods with different resistances would have been much better.
Rincoe Jellybox Nano Specifications
| Dimensions: | 54mm x 68.2mm x 19 mm |
| Material: | Zinc alloy + PCTG + PC |
| Battery Type: | Integrated 1000mAh |
| Pod Capacity: | 2.8mL |
| Wattage Output: | 10 to 30 Watts |
| Voltage: | 3.2 to 4.2 Volts |
| Coil Resistance: | 0.3 to 3 ohm |
| Charging Type: | Type-C Fast Charging |
| Colors: | Full Clear, Black Clear, Amber Clear, Mocha Clear, Blue Clear |
Pros&Cons
The Positives
√ Exceptionally good flavor and airflow
√ Good build quality
√ Decent juice capacity with side refilling slot
√ Replaceable coils
√ Easy to use
The Negatives
× Annoyingly bright lights
× Too boxy
× Battery life could be better with the 0.5-ohm coil
Final Thoughts
As always, there are some cons. The first thing is the boxy design. Rounded edges would have been better. As for the battery life, it is ok, but it does not last long using the lower resistance coil. Finally, those LED lights are too bright, but thankfully they can be turned off.
Other than that, this device is nearly perfect. The main thing is that it vapes great on both coils, especially the MTL. This is one of the smoothest MTL coils out there, producing phenomenal flavor and outstanding airflow. The RDL coil is not bad either, but the MTL is the best.her things in this pod mod’s favor are that it is easy to use, has good build quality, and it has a side-filled pod instead of a bottom-filled pod.
