Ultroner Sphinx DNA250C TC VW Box Mod 200W

Ultroner Sphinx DNA250C Box Mod 200W

• Brand: Ultroner
• Unit: set
• Type: Box Mod
  
• Net Weight: 315(g)

The combined shipping cost will be calculated automatically by the system after you choose the shipping destination in the checkout step.

INTRODUCTION

Product introduction

Ultroner Sphinx DNA250C Box Mod made of Stainless Steel & Stabilized Wood. The stab wood has a semi-gloss finish, making it extremely ergonomic and also results in an improved appearance. The Ultroner Sphynx DNA250C Mod works with dual 21700 batteries but is also compatible with 20700 and 18650 batteries with the two included battery adapters. A hinged battery door at the bottom permits easy access to the battery bay. Easy charging via the micro USB port on the control surface and the included cable. The USB port also functions as the firmware update port or to customize the settings via Escribe. Ultroner Sphinx DNA250C Box Mod is powered by Evolv DNA250C Chipset. The maximum achievable output is 200 watts and has multiple working modes, which are POWER (VW) / TC (NI200/ SS/ Ti) / TCR modes. And, the mod operates in temperature control mode with nickel, titanium and stainless steel heating elements up to 600 degrees Fahrenheit. At the top, you will see a 510 connector that is compatible with atomizers up to 24mm, without any overhang.

Parameters

Size: 91mm x 50mm x 42mm

Material: SS & Stabilized Wood

Battery: 2 x 18650/20700/21700 batteries (Not Included)

Chipset: Evolv DNA250C Chipset

Mode: POWER (VW) / TC (NI200/ SS/ Ti) / TCR modes

Output Range: 1-200W

Temperature Range: 200-600℉ / 100-315℃

Resistance Range: from 0.1ohm / TC 0.08ohm

Charging Current: 2A, 

Charging Port: Micro USB port

Thread: spring-loaded 510, gold-plated pin

Protection: against low/high resistance, overheating, short circuit, reverse polarity, overcharging/over-discharge protections

Colors: Green, Blue, Purple

Ultroner Sphinx DNA250C TC VW Box Mod 200W comes with

1 x Ultroner Sphinx Box Mod

2 x 18650 battery adapters

SPECIFICATION

Features

• Stainless Steel & Stabilized Wood construction

• Compatible with 18650/20700/21700 batteries

• 200W maximum output

• High-performance Evolv DNA250C Chipset

• Support POWER (VW) / TC (NI200 / SS / Ti) / TCR modes

• Spring-loaded 510 connection, gold-plated pin

• Suitable for 25mm atomizer

• Multiple protection for your safe vaping.

ORDERING TIPS

Package

Simple paper box. Customary Packing from the factory, the packing is subject to change without notice.