August 29, 2018 by Janet.
In today's
vape tanks market, it is rare to see that a product has a particularly long sales time, except the Uwell Crown 3 Sub Ohm Tank. Today we will make a comparison with another new hot-sale tank: FreeMax Mesh Pro Sub Ohm Tank.
In terms of design, but I have to admit that the Crown 3 is quite the looker, which is made of stainless steel and quartz glass, measures 62.7 mm in length, with a diameter of 24.5 mm, and holds up to 5 ml of e-liquid. The top cap is flat and very well machined. On the interior, there is a large o'ring type of gasket that keeps the juice in the tank where it belongs. The threading is very smooth and the top cap goes on and off very easily. The fill ports for the crown 3 are bean-shaped but kind of small. There is a locking mechanism that you get a key for in the packaging. It enables the user to lock down the coil so that when you unscrew the base, the coil stays in place. The base of the tank has some knurling to it as well as two airflow slots. The airflow slots have no click to them and stopper on both ends. Overall, the whole tank is very well machined.
About Uwell Crown 3' performance. The Crown 3 comes with two coil-heads, one rated at 0.5Ω and another at o.25Ω. This tank vapes okay but not at the recommended wattages that
Uwell has on the coils. They have severely underrated these coils and the flavor is just okay. The flavor would probably be a lot better if the quality control on the coils was a lot better.
Mesh Pro has a 28mm diameter chamber with a top filling design and a storage capacity of 5ml, while the storage capacity can be expanded to 6ml when using a bubble chamber. Mesh Pro is compatible with Fireluke and Fireluke Pro's coil (or RTA's deck) but does not support the use of previous generation Mesh coils. Mesh Pro is equipped with four new finished coils, the first series of coils with a Multi-Mesh design. The atomizer contains a 0.15-ohm single-mesh coil and a 0.2-ohm dual-mesh coil. The series also includes a 0.15-ohm tri-mesh coil and a 0.12 ohm 316 stainless steel single-mesh coil. The stainless steel coil is compatible with the pressure regulating and temperature control modes.
About the
FreeMax Mesh Pro's performance. The Mesh Pro Tank has a relatively large volume. Before use, it must be fully moistened with cotton. It is best to stop it for 15-20 minutes after injecting the e-juice to make the cotton fully wet. It is recommended that the best taste is between 65-75W when using it. The taste is rich, although it is a 510-sized drip, the taste is very full, the amount of smoke is also very alarming, 3ML's consumption is also quite fast, the meshed coil's heating and carbon deposit are less than the normal tanks'.
Both two sub ohm tanks are hot sell in vape online store.
