Geekvape Frenzy Pod System Kit

Geekvape Frenzy Kit

• Brand: Geekvape
• Unit: set
• Type: Pod Vape Kit
  
• Net Weight: 160(g)

Combined shipping cost will be calculated automatically by the system after you choose shipping destination in the checkout step.

INTRODUCTION

Product introduction

Geekvape Frenzy Kit is exquisitely designed with both carbon fiber and resin finish options. Powered by a built-in 950 mAh battery, the battery section integrates an advanced AS Micro chipset, permitting for TC boost mode and precise temperature control to prevent dry heating. The chipset also features an automatic output matching function. This means that when the 0.7ohm coil is in use, the output will adjust to power mode which can be set to 2.5V, 2.7V or 2.9V. When the 1.2ohm coil is inserted, the output will automatically engage temperature control mode. The battery life is monitored via a side LED light. By pressing the fire button twice, the light will glow in different colors to show, green for higher than 70%, blue for 31-69% and red means 30% or lower. During charging, the LED will blink the color of the current charge level, red for 0-69%, green for 70-100% and a green light will stay lit once the battery is fully charged. As for the 2ml pod, it is attached to the battery section via a magnetic connection. Replacing the coil on each pod is done via a thread-less cap that needs only a quarter turn to remove the coil. This cap allows for airflow control adjustment as well. And, refilling the pod is effortless due to a bottom cap which will expose a fill slot when removed. With purchase, you will receive a 0.7ohm NS mesh coil which is pre-installed inside the pod and a 1.2ohm NS coil which is said to produce maximum flavor production. 8 colors to choose from.

Parameters

Size: 86.1mm * 37mm * 15.7mm
Material: Zinc Alloy & Resin
Battery: Built-In 950mAh Battery
E-Juice Capacity: 2mL
Output Power: 2.5V 420℉/2.7V 440℉/2.7V 460℉
Coil Resistance: 0.7ohm-3ohm
Charging Specification: 5V 1A
Low Voltage Warning: 3.3V±0.1V
PCBA Temperature Alarm: 80℃
Maximum Output Duration: 10s
Working Temperature:-10~45℃
Stand-By Current: Less Than 10uA
Charging: MicroUSB Port

Geekvape Frenzy Kit comes with

1 * Frenzy Kit
1 * NS Coil 1.2ohm
1 * USB Cable
1 * User manual

SPECIFICATION

Features

1. Designed for the Ultimate User Experience
2. Advanced AS Micro Chipset

3. Refined NS mesh coil system for maximum flavor (compatible with flint)
0.7 Ohm NS Mesh Coil （Mesh KA1）（pre-installed）
1.2 Ohm NS Coil （SS316L）（included）(Maximum flavor)

4. USB port for charging

ORDERING TIPS

Package

Simple paper box. Customary Packing from the factory, the packing is subject to change without notice.