Geekvape H45 (Aegis Hero 2) Pod Mod Kit 1400mAh 45W

Geekvape H45 (Aegis Hero 2) Kit

• Brand: Geekvape
• Unit: set
• Type: Pod Mod Kit
• Net Weight: 165(g)

The combined shipping cost will be calculated automatically by the system after you choose the shipping destination in the checkout step.

Geekvape H45 Kit INTRODUCTION

Geekvape H45 Kit features 1400mAh built-in battery with max 45W output. It dominates a stable output system for consistent flavor whenever your kit is going low. Aegis Hero 2 kit maintains a high level of flavor by continuing to improve its top airflow for leakproof design, when the airflow enters via the side inlets, the coil contacts more air and has the ability to warm the e-liquid, then produce satisfactory flavor. From its top-mounted dilling port, it avoids leaking and is easy to refill this 4ml capacity. H45 kit is compatible with Geekvape B Series Coil, there are three resistant options, including 0.3ohm Coil-Rated 10-14W, 1.2ohm Coil-Rated 10-14W, 0.4ohm KA1 Mesh Coil - Rated 25-35W, 0.6ohm KA1 Mesh Coil - Rated 15-25W. It supports magnetic connection and is no hassle to lose and drops when in use.

Features

• 1400mAh Built-in Battery

• Max 45W Output

• Tri-proof Technology

• New Metallic Shell

• Stable Output, Buck-boost Tech

• 0.96 Inch TFT Screen

• Fit For Geekvape B Series Coil

• Magnetic Connection

Geekvape H45 Kit SPECIFICATION

Size: 43.1* 28.6* 91.05mm

Battery: built-in 1400mah battery

Output: 5-45W

Screen: 0.96 inch TFT Screen

Modes: Power/ Bypass

Resistance: 0.1-2ohm

Working Temperature: 0-45℃

Charging: 5V/2A

Standby current: <20uA

Drip tip: 510 drip tip

Capacity: 4ml

Resistance: 0.4ohm(25-35W), 0.6ohm(15-25W)

Geekvape H45 Kit PACKAGE LIST

1 * Geekvape H45 Device

1 * Geekvape H45 Empty Pods 4ml

2 * Geekvape B Series Coils(Pre-installed: 0.4ohm, 25-35W

Spare: 0.6ohm, 15-25W)

1 * Coil Tool

1 * USB Type-C Cable



ORDERING TIPS

Attention: As the manufacturer needs the serial number to provide a replacement, we highly recommend you keep the original packing box or take picture of the code before discarding it. Thank you!