Innokin Sceptre Tube Kit 1300mAh 20W Clearance

Innokin Sceptre Tube Kit

• Brand: Innokin
• Unit: set
• Type: Vape Pen Kit
• Net Weight: 75(g)

The combined shipping cost will be calculated automatically by the system after you choose the shipping destination in the checkout step.

Innokin Sceptre Tube Kit INTRODUCTION

Innokin Sceptre Tube Kit is powered by a 1300mAh built-in battery and can be charged via MicroUSB Type-C port, additionally, it caters to 2ml e-juice and allows for freebase e-juice. It is compatible with the Innokin S-Coil series, and the 0.5ohm S-Coil is pre-installed, replacing it via plug-n-play way. The Sceptre Tube Pod connects through magnets and is refilled by the top slide-to-fill system, it fulfills enough airflow based on its dual slotted airflow system. This kit is operated by a button and has a LED light that acts as both charging indicator (green: >90%, red: <90%) and battery indicator (green: >50%, orange: 10%-50%, red: <10%). There have two power modes (high: 20W, low: 18W) to attach your vapor habit, which is ideal for beginners.

Features

• 1300mAh Built-in Battery

• 2ml E-juice Pod

• For Freebase E-juice

• Compatible With Innoking S-Coil Series

• Pre-installed 0.5ohm S-Coil

• Plug-n-play Way

• Magnetic Connection

• Top Slide-to-fill System

• Dual Slotted Airflow System

• LED Light

• Charging Indicator (green: >90%, red: <90%)

• Battery Indicator (green: >50%, orange: 10%-50%, red: <10%)

• Two Power Modes (high: 20W, low: 18W)

Innokin Sceptre Tube Kit SPECIFICATION

Device Dimensions: φ20.0*118.2

Pod Capacity: 2ml

Coil: S-Coil 0.5ohm

Resistance Range: 0.4Ω - 3.5Ω

Battery: 1300mAh/4.81Wh/3.7V

Power Modes: 2 Modes

Minimum / Maximum Wattage: 18W/20W

Minimum / Maximum Voltage: 2.65V - 3.40V

Charging Current: 5V/1A

Color: Silver / Black / White / Red / Pink / Purple

Innokin Sceptre Tube Kit PACKAGE LIST

1 x Innokin Sceptre Tube

1 x Innokin Sceptre Tube Pod

1 x 0.5ohm S-Coil

1 x Type-C USB Cable

1 x User Manual



ORDERING TIPS

Attention: As the manufacturer needs the serial number to provide a replacement, we highly recommend you keep the original packing box or take picture of the code before discarding it. Thank you!