Joyetech CUBOID TAP 228W MOD Clearance

Joyetech CUBOID TAP Mod

• Brand: Joyetech
• Unit: set
• Net Weight: 350(g)

Combined shipping cost will be calculated automatically by the system after you choose shipping destination in the checkout step.

Product introduction

Joyetech Cuboid Tap 228W Mod furnished with Joyetech TAPTEC technology. Joyetech creatively developed the TAP buttons, paired with the pressure-sensitive system and vibration motor. It is equipped with a 1.3 inch OLED display, allowing for easily monitor and modify with ease. CUBOID TAP is powered by dual replaceable 18650 cells with which you can fire it up to ultra 228W. Featuring the charging balance system, it supports a 2.0A quick charge capability, providing a faster-charging resolution.

Parameters

Size: 28.0mm*41.0mm*86.0mm
Maximum output wattage: 228W
Temperature control: 100-315°C/ 200-600°F
Output mode: Power/Clock/Temp (Ni, Ti, SS316)/TCR (M1/M2/M3)/USB Charge mode
Battery using: dual married high-rate 18650 cells
(continues discharge current 25A)
Max charging current: 2.0A
Max output current: 50A
Input Voltage: DC 5V
Colors: Black, Silver, Red, Yellow, Blue

Joyetech CUBOID TAP Mod comes with

1*CUBOID TAP (no cell)
1*QC USB cable
2*Manual
1*Warranty Card
1*Warning Card
Spare parts

Features

1.2 inch OLED display screen

APTECTM technology changes what matters

We historically removed the physical regulatory buttons, instead, we creatively bring you the new Joyetech
TAPTECTM technology. Simply tap the panel, then it's all under your control.

Pressure-sensitive capability applied

Thanks to the advanced technology in our time. The CUBOID TAP adopted the pressure-sensitive system inside, with which you can active the menu by clutching the device in sequence. Support 2.0A quick charge capability

Equalizing charge system

Equalizing charge technology was applied in order to bring all cells to an equal state of charge.

Applicable for various tanks

The exquisite spring loaded 510 connector of the CUBOID TAP is applicable for tanks with 510 length ranged at 4.0mm to 5.5mm.Tanks are also free to go up to 25mm diameter as you prefer.

Upgradeable firmware

CUBOID TAP comes with the upgradeable firmware.
Having the latest firmware, real-time clock, preheat, custom logo, and reverse charging are all available.

Power bank for reverse charge

The CUBOID TAP can be served as a power bank to charge other e-cigarettes or electronic devices. Install the new reverse charging adapter (sell separately) on the 510 connector.

Package

Simple paper box. Customary Packing from the factory, the packing is subject to change without notice.