Joyetech CUBOID TAP Kit 228W with ProCore Aries Tank Clearance

Joyetech CUBOID TAP Full kit

• Brand: Joyetech
• Unit: set
• Net Weight: 480(g)

Combined shipping cost will be calculated automatically by the system after you choose shipping destination in the checkout step.

Product introduction

Joyetech CUBOID TAP Full kit comes with Cuboid tap Mod and ProCore Aries Atomizer, Cuboid Tap furnished with Joyetech TAPTEC technology. Joyetech creatively developed the TAP buttons, paired with the pressure-sensitive system and vibration motor. It is equipped with a 1.3 inch OLED display, allowing for easily monitor and modify with ease. CUBOID TAP is powered by dual replaceable 18650 cells with which you can fire it up to ultra 228W. Featuring the charging balance system, it supports a 2.0A quick charge capability, providing a faster charging resolution.

Parameters

Size: 28.0mm*41.0mm*134.0mm
Atomizer Capacity: 4.0ml
Maximum output wattage:228W
Input Voltage: DC 5V
Temperature control: 100-315°C/ 200-600°F
Output mode: Power/Clock/Temp (Ni, Ti, SS316)/TCR (M1/M2/M3)/USB Charge mode
Applicable heads: ProC series heads
Battery using: dual married high-rate 18650 cells
(continues discharge current 25A)
Max charging current: 2.0A
Max output current: 50A
Colors: Black, Silver, Red, Yellow, Blue

Joyetech CUBOID TAP Full kit comes with

1*CUBOID TAP (no cell)
1*ProCore Aries Atomizer
1*ProC1 (0.4ohm) head
1*ProC4 (0.15ohm) head
1*Spare glass tube
1*QC USB cable
2*Manual
1*Warranty Card
1*Warning Card
Spare parts

Features

1.2 inch OLED display screen, TAPTECTM, pressure-sensitive, vibration motor, 2A QC, power bank, preheat, custom logo & real-time clock

APTECTM technology changes what matters

We historically removed the physical regulatory buttons, instead, we creatively bring you the new Joyetech
TAPTECTM technology. Simply tap the panel, then it's all under your control.

Pressure-sensitive capability applied

Thanks to the advanced technology in our time. The CUBOID TAP adopted the pressure-sensitive system inside, with which you can active the menu by clutching the device in sequence. Support 2.0A quick charge capability

Flip type top-fill design
Simply push and pull the top cap to reveal the filling hole then you're free to fill the e-liquid. Simple and convenient.

Detachable structure, easy to clean
The ProCore Aries atomizer can be easily detached and is able to wash separately.

Equalizing charge system

Equalizing charge technology was applied in order to bring all cells to an equal state of charge.

Innovative buck-boost technology

The CUBOID TAP adopts the innovative buck-boost technology to provide much steadier output power.

Quick charge system

The CUBOID TAP has 2.0A maximum charging current with which it can get fully charged more quickly than normal ones when using the Avatar quick charger (sell separately).

Power bank for reverse charge

The CUBOID TAP can be served as a power bank to charge other e-cigarettes or electronic devices. Install the new reverse charging adapter (sell separately) on the 510 connector.

Applicable for various tanks

The exquisite spring loaded 510 connector of the CUBOID TAP is applicable for tanks with 510 length ranged at 4.0mm to 5.5mm.

Tanks are also free to go up to 25mm diameter as you prefer.

Upgradeable firmware

CUBOID TAP comes with the upgradeable firmware.
Having the latest firmware, real-time clock, preheat, custom logo, and reverse charging are all available.

Package

Simple paper box. Customary Packing from the factory, the packing is subject to change without notice.