Uwell Havok V1 Replacement Pod Cartridge 4ml Clearance

Uwell Havok V1 Pod Cartridge

• Brand: Uwell
• Unit: set
• Type: Pod Cartridge
  
• Net Weight: 21/30(g)

The combined shipping cost will be calculated automatically by the system after you choose the shipping destination in the checkout step.

Uwell Havok V1 Pod Cartridge is made of PCTG. It is an open pod with a capacity of 4ml, cost-effective to use. You can check the current remaining amount of juice through the triangular area on both sides of the pod. A whole design with a drip nozzle, cannot be replaced. The pod uses a sliding top fill design. (CRC version filling method is bottom filling.) You can fill your favorite vape juice by sliding the top cap to reveal the silicone fill port, which has done a decent job to prevent the e-liquid from leaking. Don't forget to close the cap and let it stand for 10 minutes to fully saturated the coil. On the side of the pod, there is an airflow valve, allowing you to switch between a smoother airflow or tighter draw. Just adjust the intake air up and down. Combination of adjustable airflow and output guaranteed to deliver a personal flavor need. Compatible with two different types of Havok V1 coil, 0.25ohm coil for DTL, and 0.6ohm coil for MTL/Restricted DL. The coil can be replaced for more prolonged use and lower cost. The simple bottom coil installation process can easily replace the coil when necessary. Please make sure the bottom of the coil is flush with the bottom of the pod when installing the coil. A new coil can be installed with self-adaptive power, to prevent it from burning. In addition, its Pro-FOCS flavor testing technology delivers an excellent vape experience with untainted and true flavor.

Features

• 4ml Refillable Pod

• Sliding Top-fill Design

• Odds-on No Leaking

• Adjustable Airflow - Side Airflow Valve

• Pro-FOCS Flavor Testing Technology

• Replaceable Coil

• New HAVOK V1 Coil (0.25Ω/0.6Ω)

• Press-Fit Coil Installation

• Magnetic Pod Connection

1 x HAVOK V1 Refillable Pod

1 x 0.25Ω HAVOK V1 Coil (DTL) or 0.6Ω HAVOK V1 Coil (MTL/RDL) 

Attention: As the manufacturer needs the serial number to provide a replacement, we highly recommend you keep the original packing box or take picture of the code before discarding it. Thank you!