Geekvape H45 RTE (Aegis Hero 2 RTE) Pod Mod Kit 1400mAh 45W Clearance

Geekvape H45 RTE Kit (Aegis Hero 2 RTE)

• Brand: Geekvape
• Unit: set
• Type: Pod Mod Kit
• Net Weight: 108(g)

The combined shipping cost will be calculated automatically by the system after you choose the shipping destination in the checkout step.

Geekvape Aegis Hero 2 RTE Kit INTRODUCTION

Geekvape Aegis Hero 2 RTE Kit is a signed Aegis Hero 2 Kit with a collaborator's signature printed on the side. This RTE edition features a 4ml vape juice capacity, 1400mAh internal battery, 5-45W output range, and is compatible with Geekvape B coil series for both nic salt and freebase e-juice. Embodying a good performance when it uses new tri-proof, the IP67 rated design is dependent on its zinc alloy construction, It polishes its 0.96" TFT display screen, and has two adjustment buttons to control. The 0.4ohm and 0.6ohm B coils are prepared, coupled with the top airflow control ring, which allows you to customize your flavor and vapor.

Features

• Collaboration Between Geekvape and Rip Trippers

• RTE Edition

• 4ml Vape Juice Capacity

• 1400mAh Internal Battery

• 5-45W Output Range

• Compatible With Geekvape B Coil Series

• For Both Nic Salt and Freebase E-juice

• New Tri-proof

• Zinc Alloy Construction

• 0.96" TFT Display Screen

• 0.4ohm and 0.6ohm B Coils are Prepared

• Top Airflow Control Ring

• 510 Drip Tip

Geekvape Aegis Hero 2 RTE Kit SPECIFICATION

Size: 43.1* 28.6* 91.05mm

Battery: built-in 1400mah battery

Output: 5-45W

Screen: 0.96 inch TFT Screen

Modes: Power/ Bypass

Resistance: 0.1-2ohm

Working Temperature: 0-45℃

Charging: 5V/2A

Standby current: <20uA

Drip tip: 510 drip tip

Capacity: 4ml

Resistance: 0.4ohm(25-35W)

0.6ohm(15-25W)

Geekvape Aegis Hero 2 RTE Kit PACKAGE LIST

1 * Geekvape H45 RTE (Aegis Hero 2 RTE) Device

1 * Geekvape Pod(4ml)

2 * Geekvape B Series Coils(Pre-installed: 0.4ohm, 25-35W

Spare: 0.6ohm, 15-25W)

1 * Coil Tool

1 * USB Type-C Cable




ORDERING TIPS

Attention: As the manufacturer needs the serial number to provide a replacement, we highly recommend you keep the original packing box or take picture of the code before discarding it. Thank you!